TTS Series Products
If a complete test of the ECU is required, not only the communication network needs to be connected to the test system, but also the I/O interfaces. TOSUN'sThe TTS test system integrates all the circuit components required to connect the I/O channels in a single module., , ,It can greatly simplify the setup of test benches and HIL test systems, and improve the efficiency of building and testing.
TTS provides digital, analog, fault injection, bus communication, power management and other boards. Among them, 9000 series boards focus on each kind of board to provide independent functions, such as 9011 provides digital signal acquisition/output capability, 9015 provides analog signal acquisition/output capability, 9021 provides fault injection capability, and 9036 provides analog resistor capability; whereas, 8000 series focuses on the combination of multiple functions, such as 8516 provides digital, analog signal acquisition/output and fault injection capabilities.
Runs on TSMaster software
TTS system runs based on TSMaster, which realizes TTS chassis, supporting instrumentation, diagnostics and calibration in one package on the software side, and realizes a single system to cover the testing requirements in developing vehicle ECU. While conventional systems on the market need to use systems from multiple sources, such as some software provides test scheduling capabilities, some provide diagnostic capabilities, some provide calibration capabilities, and some provide board capabilities. In contrast, theTTS has the characteristics of simpler system development, more stable operation and more affordable cost..
In order to cooperate with TTS system operation, TSMaster provides graphical programming language, and on this basis further provides Excel to graphical language development method. Users can edit the test process in excel according to the fixed steps, load it into TSMaster to realize the control of the test system, and can customize the test report template, and generate the test report automatically after executing the test.
01
Features of TTS
- All relevant test components are integrated into one device
- CAN FD/CAN/Vehicle Ethernet/FlexRay/LIN Communication Boards
- Digital Input/Output Boards
- Analog Input/Output Boards
- Relays, fault injection boards, etc.
- Resistors for analog sensors
- Minimal wiring effort for test setups
- Voltage range for automotive applications
- Seamless integration into TSMaster
The TC1034Pro is a 2-way FlexRay, 2-way CAN FD bus to USB interface device with upgraded appearance and functions based on the previous TC1034; it can easily perform the work of FlexRay network development, simulation, testing, etc. It is suitable for R&D personnel, testers, ECU production lines and test engineers. It is suitable for R&D personnel, testers, ECU production line and test engineers.
02
Application Areas
-
Dedicated test systems for individual ECUs
-
2 Generic Function Tester for ECUs and Subsystems
-
3 Flexible test hardware for developer workstations
-
Desktop-level network automation test system
Digital Quantity Board TTS9011
01
Products
TTS9011 is a 12-channel digital input/output board based on TTS chassis, specialized in TTS chassis integration, each channel supports high and low level outputs and acquisition, PWM outputs and acquisition, and also supports output retrieval function when working in output mode. The board is based on CAN bus message control, bus rate of 1M bps, support Window, Linux system secondary program development, API interface makes the device can be easily integrated into other devices or software systems.
02
Technical parameters
|
Name
|
|
|---|---|
|
Basic parameters
|
|
|
channel number
|
12CH (input/output shared)
|
|
Operating Voltage/Static Power Consumption
|
12V/2W
|
|
Operating temperature
|
-20℃～+70℃
|
|
Operating humidity
|
10% to 90% (no condensation)
|
|
communications control
|
CAN 1Mbit/s
|
|
Installation
|
TTS Chassis Guide
|
|
Size Information
|
100mm*420mm
|
|
indicator light
|
12V power indicator, channel work indicator *12
|
|
Input of acquisition function parameters
|
|
|
Number of input channels
|
12CH
|
|
Input Voltage Range
|
0 to 60V
Input Threshold Voltage Threshold 0 to 60V (globally adjustable) |
|
Input Impedance
|
≥200KΩ
|
|
Input Signal Type
|
Level/PWM
|
|
PWM Measurement
|
Frequency: 0.03Hz～250KHz
Duty cycle: 0% to 100% |
|
accurate
|
100kHz~200kHz, relative error ≤ ±5%
0.03Hz~100kHz, relative error ≤ ±2.5% |
|
level measurement
|
Determined by input threshold voltage thresholds
|
|
Output function parameters
|
|
|
channel number
|
12CH (input/output shared)
|
|
Output Voltage Range
|
0 to 60V (external power supply, adjustable)
|
|
Output Current Range
|
0mA～1A
|
|
PWM output
|
Frequency: 0.03Hz~200kHz
Duty cycle: 0% to 100% |
|
Push-pull output accuracy requirements
|
100kHz~200kHz, relative error ≤ ±2%
0.03Hz~100kHz, relative error ≤ ±1% |
|
High and low level outputs
|
The high level voltage can be changed by adjusting the external reference voltage
|
|
output form
|
Push/Pull/Push+Pull (controlled)
|
|
*Note: PWM output rising edge falling edge time is 680ns.
|
|
Resistor Board TTS9036
01
Products
TTS9036 is a 5-channel resistor matrix board based on TTS chassis, dedicated to TTS chassis integration, based on CAN bus message control, bus rate of 1M bps, support Window, Linux system for secondary program development, API interface makes the device can be easily integrated into other devices or software systems.
02
Technical parameters
|
Name
|
|
|---|---|
|
Basic parameters
|
|
|
channel number
|
5CH
|
|
Operating Voltage/Power Consumption
|
12V/0.6W
|
|
Operating temperature
|
-20℃～+70℃
|
|
Operating humidity
|
10% to 90% (no condensation)
|
|
communications control
|
CAN 1Mbit/s
|
|
Installation
|
slideway
|
|
Size Information
|
100mm*420mm
|
|
indicator light
|
Power indicator, channel work indicator *5
|
|
Functional parameters
|
|
|
Resistor Output Range
|
1Ω~4194303Ω
|
|
step value
|
1Ω
|
|
Resistance Precision (% of Value +offset)
|
1Ω~127Ω, resistance accuracy ±2Ω
127Ω~1023Ω, resistance accuracy ±1% 1023Ω~4194303Ω, resistance accuracy ±0.1% |
|
Channel voltage protection range
|
-40V to 40V
|
|
current range
|
-100mA to 100mA
|
|
resistive power
|
1/4W
|
|
Output function parameters
|
|
|
channel number
|
12CH (input/output shared)
|
|
Output Voltage Range
|
0 to 60V (external power supply, adjustable)
|
|
Output Current Range
|
0mA～1A
|
|
PWM output
|
Frequency: 0.03Hz~200kHz
Duty cycle: 0% to 100% |
|
Push-pull output accuracy requirements
|
100kHz~200kHz, relative error ≤ ±2%
0.03Hz~100kHz, relative error ≤ ±1% |
|
High and low level outputs
|
The high level voltage can be changed by adjusting the external reference voltage
|
|
output form
|
Push/Pull/Push+Pull (controlled)
|
Fault Injection Board TTS9021
01
Products
TTS9021 is a 3-channel digital I/O + 1-channel CAN bus fault injection board based on TTS chassis, dedicated to the integration of TTS chassis, based on the CAN bus message control, bus rate of 1M bps, support Window, Linux system secondary program development, API interface makes the device can be conveniently integrated into other devices or software systems.
02
Technical parameters
|
Name
|
|
|---|---|
|
Basic parameters
|
|
|
channel number
|
3+1CH
|
|
Operating Voltage/Static Power Consumption
|
12V/0.8W
|
|
Operating temperature
|
-20℃～+70℃
|
|
Operating humidity
|
10% to 90% (no condensation)
|
|
communications control
|
CAN 1Mbit/s
|
|
Installation
|
TTS Chassis Guide
|
|
Size Information
|
100mm*420mm
|
|
indicator light
|
12V power indicator, channel work indicator*6
|
|
Faulty Power Parameters
|
|
|
Number of input channels
|
2CH
|
|
Input Voltage/Current Range
|
0~24V/0~6A (external power supply)
|
|
Fault Function Parameters
|
|
|
Normal channel (X1-Y1 X2-Y2 X3-Y3)
|
Short to power supply VBAT
Shorted to power ground VGND Short circuit between channels Passage open road |
|
CAN channel (CAN_H,CAN_L,CANGND)
|
Short to power supply VBAT
Shorted to power ground VGND Short circuit between channels Passage open road CAN Signal Band Load Resistor |
Analog board TTS9015
01
Products
The TTS9015 AIAO board is a multifunctional analog acquisition board designed to be embedded in a TTS chassis. The board utilizes CAN bus communication and can be easily integrated into other devices or software systems. The board provides 8 independent inputs and outputs, each channel supports voltage acquisition, voltage output, current acquisition, current output, and voltage recovery when working in voltage output mode.
02
Technical parameters
|
Name
|
|
|---|---|
|
Basic parameters
|
|
|
power supply
|
12V/6W (no load)
|
|
communication interface
|
-20℃～+70℃
|
|
indicator light
|
Power indicator, channel working indicator x 8
|
|
Voltage Acquisition
|
|
|
channel number
|
8CH
|
|
Measurement range
|
-60V~+60V, 0V~+60V
|
|
sampling rate
|
250KHz
|
|
Reporting frequency
|
1KHz
|
|
ADC Resolution
|
20bit
|
|
accurate
|
±(0.4% + 60mV)
|
|
Input Impedance
|
300KΩ
|
|
voltage output
|
|
|
channel number
|
8CH
|
|
Output range
|
0.5V~+60V
|
|
DAC Resolution
|
16bit
|
|
accurate
|
±(0.4% + 60mV)
|
|
Current Acquisition
|
|
|
channel number
|
8CH
|
|
Measurement range
|
0mA~25mA
|
|
sampling rate
|
250KHz
|
|
Reporting frequency
|
1KHz
|
|
accurate
|
±1mA
|
|
current output
|
|
|
channel number
|
8CH
|
|
Output range
|
0mA~25mA
|
|
accurate
|
±1mA
|
English 
Chinese