LIN Interference Mode:

Together with the host computer program, TH7012 supports

• Interference LIN Frame Specific Bit Value
• Flip LIN Frame Specific Bit Value
• Disturbance Count Statistics
• Sampling Point Testing
• Incomplete frame headers are sent according to user requirements, and frame headers can be configured to send synchronized interval segments, synchronized interval segments + synchronized
  Segment, Synchronization Interval Segment + Synchronization Segment + Protected ID Segment
• Frame response configurable data segment and byte-to-byte interval
• ±14% deviation in transmission baud rate
•  Measurement Position Time
• Disturbance Trigger Output Function

CAN(FD) Interference Mode:

TH7012 Support:

• Interference CAN (FD) specific bit values
• Disturbance length is configurable
• Multiple trigger modes, such as frame trigger, error trigger, software trigger, etc.
• Bit Width Deviation Test
• Bus-off Behavior Test
• Sampling point testing and other functions

ISO 16845 Testing Mode:

When configured for ISO 16845 test mode, the TH7012 verifies the following behaviors of the part under test:

• Supports testing of the DUT's response to standard, extended, CAN FD and CAN frames with different identifiers and frame lengths.
  FD Expanded frame sending and receiving capabilities
• Supports the error handling function of the test IUT, including BIT error, CRC error, STUFF error, FORM
  Errors and overload frame errors
• Supports the ability to test different behaviors of the IUT in active and passive error states

Functional Characteristics:

• Support for interfering with specific bit values of LIN messages
• Supports LIN interference counting
• Supports LIN frames with bit-bit, bit-integer explicit jamming, implicit jamming, and flip-flop jamming.
• Supports LIN frame interference level length configuration
• Supports CAN (FD)/LIN sample point testing
• Supports LIN to send self-configurable frame headers
• Supports LIN ± 14% transmit baud rate offset
• Supports measurement of LIN frame time slots
• Supports LIN Interference Trigger Output
• Support for interfering with bit-specific values of CAN (FD) messages
• Supports customized CAN (FD) jamming sequences or message sequences up to 65536 jamming points
• Supports CAN (FD) interference counting function
• Supports CAN (FD) framing bit bit integer dominant, recessive, flip-flop interference
• Supports CAN (FD) Interference Sequence Configuration and Transmission
• Supports CAN (FD) frame interference level length configuration
• Supports CAN (FD) bus bit width tolerance testing
• Supports CAN (FD) Bus Bus-off behavior testing;
• Support for ISO 16845 Validation of IUT response to special lengths and identifiers
• Supports ISO 16845 Verifies that the IUT handles CAN standard frames correctly
• Supports ISO 16845 Verifies that the IUT handles CAN expansion frames correctly
• Supports ISO 16845 Verifies that the IUT handles CAN FD frames correctly
• Supports ISO 16845 Verifies that the IUT handles CAN FD expansion frames correctly
• Support for ISO 16845 Verify that the IUT responds correctly to BIT errors
• Supports ISO 16845 Verifies that the IUT responds correctly to STUFF errors
• Supports ISO 16845 Verifies that the IUT responds correctly to FORM errors
• Support for ISO 16845 Verify that the IUT responds correctly to CRC errors
• Supports ISO 16845 Verification of correct bit timing of CAN frames for IUTs
• Supports ISO 16845 Verifies that the IUT handles overloaded frames correctly
• Supports ISO 16845 Verify that the IUT responds to non-nominal bits and that the error counter is detected correctly.

Technical parameters:

The post TH7012 – CAN FD/LIN 总线干扰仪 first appeared on 上海太阳集团6138科技有限公司.