太阳集团6138(CHINA)澳门企业-环球百科 /en/product/tp1034/ /en/product/tp1034/#respond Wed, 05 Jun 2024 10:09:45 +0000 /?post_type=product&p=10037 TP1034 is a 2-channel Flexray, 2-channel CAN FD bus to PCIe interface device; it can easily perform FlexRay network development, simulation, testing and other tasks.

The post TP1034 – 2路Flexray，2路CAN FD转PCIe接口 first appeared on 上海太阳集团6138科技有限公司.

]]> The TP1034 is operated by the TSMaster software, which enables multiple TP1034s to be applied in parallel or to work in conjunction with other TOSUN FlexRay products. When combined with TOSUN's CAN, LIN, and Automotive Ethernet connectivity tools, the TP1034 enables a single PC with high performance multi-bus analysis and simulation capabilities. It is suitable for testers, ECU production lines, and test engineers.

Key Features:

  • Flexible configuration of communication controller cache
  • Detectable empty frames
  • Can be composed of multiple cycles to form a composite communication mode (Cycle multiplexing)
  • Supports frame loads up to 254 bytes
  • Support for PDUs
  • Startup monitoring function available
  • Support Flexray message recording and playback
  • 2 Flexray channels can be used in parallel as two Flexray nodes

 

Features:

  • Windows drive-free design with system compatibility
  • 2 FlexRay channels (both channels contain A and B, support internal bridging to be used as one channel, single device cold start possible)
  • 2 CAN FD channels
  • The Flexray channel supports 700KB of internal transmit buffer space and can store 240 transmit configurations concurrently.
  • Auxiliary communication controller for cold start without adding additional nodes
  • Perfectly adapted to FlexRay, CAN/CAN FD bus applications based on TSMaster
  • Compact design, especially for mobile applications
  • Support Windows system secondary development interface
  • Built-in 120 ohm termination resistor on CAN side configurable by software
  • Built-in 100 ohm termination resistor on Flexray side is software configurable

 

Typical applications. 

  • FlexRay Bus Flexibility Analysis
  • Precise time analysis of bus communication data
  • ECU test analysis and gateway applications
  • Various automated test benches

The post TP1034 – 2路Flexray，2路CAN FD转PCIe接口 first appeared on 上海太阳集团6138科技有限公司.

]]> /en/product/tp1034/feed/ 0