GCM48 - General Purpose Control Module

• Supports 6 CAN 2.0 buses and 3 LIN buses (configurable master-slave mode), wake-up compatible
• Provides 12 analog inputs, 4 frequency inputs, and 1 wake-up input.
• Equipped with 7 low-side drive outputs, independent fuel gauge drive output and one H-bridge drive output.
• The core processor is the NXP MPC5605B, clocked at 64MHz, with 512KB of application flash and 64KB of RAM.
• Supply voltage range 8-16V, with multiple overcurrent/reverse/short-circuit protection
• Supports automated code generation and simulation test development on MATLAB/Simulink + Raptor-Dev platforms.
• Industrial grade environmental design, -40°C ~ 105°C operating temperature, protection class IP6k7

Correspondence:

The GCM48-2104 module has a total of 6 CAN 2.0 buses. The module supports Wake-on-CAN function.
The module also has 3 LIN buses. LIN2 and LIN3 are fixed in LIN host mode, while LIN1 can be configured as LIN master or LIN slave in Raptor. The module also supports the LIN wake-up function.

Power supply:

The logic battery input needs to be permanently connected to the battery voltage to supply power when the microprocessor is in the wake-up state. This logic battery input should be individually fused to avoid excessive current flow in the system that could compromise the safety of the logic power supply routing.

Maximum rating:

Operating ratings: