GW2112 - 2-way CAN FD Gateway/Router
The GW2112 is a high performance CAN/CAN FD intelligent router. The integrated 2-channel configurable CAN/CAN FD interface supports ISO standard CAN FD and non-ISO CAN FD standards. The behavior of the GW2112 and the data routing between the 2 CAN FD channels can be configured arbitrarily, e.g., CAN can be converted to CAN FD or CAN FD applications can be integrated into existing CAN 2.0 networks.
Each interface is equipped with an independent 2500VDC electrical isolation protection circuit, which enables the interface card to avoid damage due to ground loop current, and enhances the reliability of the system for use in harsh environments.
The GW2112 supports the configuration of basic information of two CAN ports at the same time, such as CAN mode, baud rate, filtering, etc. The GW2112 also supports the configuration of the basic information of two CAN ports.
Features:
- Time stamp resolution 1 μs, which meets advanced requirements.
- High-speed USB2.0 interface, Windows system, Linux system drive-free design, with excellent system compatibility.
- CAN channel DC2500V isolated.
- CAN channel baud rate 125Kbps-1Mbps adjustable.
- Supports blf, asc format data logging and offline/online playback.
- Support information security testing.
- Support Windows, Linux system secondary development interface (subsequent versions support).
- Built-in 120 ohm termination resistor is software configurable.
Typical applications.
- Multi-Channel CAN FD/CAN Bus Data Acquisition for Whole Vehicles
- Domain Controller Testing
- Various automated test systems
Download
Simplified Chinese
English version
其他信息
PC side | High-speed USB 2.0 interface |
---|---|
Timestamp accuracy | 1us, hardware message timestamp for higher-order requirements |
Terminal resistance | Built-in 120 ohm termination resistor is software configurable |
Forwarding delay | <0.1ms |
Isolated Voltage | CAN channel DC2500V isolated |
Power supply method | DC9-36V |
Shell material | Aluminum products |
Size | 128mm*120mm*21.5mm |
Operating temperature | -40℃~80℃ |
Operating humidity | 10% to 90% (non-condensing) |
working environment | Keep away from corrosive gases |