Sharing | TSMaster Test Report Generator Operation Guide

The TSMaster Test Report Generator is required when users develop test cases based on the TSMaster software, or when they need to generate HTML reports using TSMaster.

Table of Contents for this article

01. Test_Report Description

Test_Report is a set of test report templates provided by TSMaster for customers, which integrates test report printout, image display, test status display, test pass/fail rate display, and execution time display as a whole, the test report example is shown below:

02, Test_Report function description

1.test_init

function name	s32 test_init(const pnative_int Handle, const char* ReportName)
Function	Initialize the test report generator and specify the name of the generated HTML report
call location	You need to call this function to initialize before executing other functions.
Input parameter	Handle :Handle to the test report ReportName: HTML name of the report
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; Test_init(&Handle , "testReport").

2.test_title

function name	s32 test_title(const native_int Handle, const char* testgroup, const char* testcase, const char* image, const char* testpurpose)
Function	Enter the test case group to which the current test case belongs, the name of the test case, and related information.
call location	Called before the start of each test case, this function is used to identify the test case group, test case name, and can be imported into the test environment picture and the purpose of the test and reference standards
Input parameter	Handle : Handle to the test report testgroup:: name of test case group testcase: name of the test case image: test environment picture, can be any picture, can be empty Testpurpose: the purpose of the test and the test reference standard, string, separated by commas, can be empty
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; s32 ret = Test_init(&Handle , "testReport"); if(ret == 0) { test_title(Handle , "testgroup1", "testcase1", "", ""); }

3.test_step

function name	s32 test_step(const native_int Handle, const char* teststep, const char* Description)
Function	Specific steps and descriptions for documenting test cases
call location	Called after the test_title function for each test case.
Input parameter	Handle :Handle to the test report teststep: test step Description:Step description, can be separated by English commas, to enter the desired results and actual results
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; s32 ret = Test_init(&Handle , "testReport"); if(ret == 0) { test_title(Handle , "testgroup1", "testcase1", "", ""); test_step(Handle, "1", "Starting to power up, powering up successfully, powering up successfully");; }

4.test_pass

function name	s32 test_pass(const native_int Handle, const char* teststep, const char* Description)
Function	Marking a step in a test case as passing the
call location	The test_title function for each test case is followed by the
Input parameter	Handle :Handle to the test report teststep: test step Description:Step Description
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; s32 ret = Test_init(&Handle , "testReport"); if(ret == 0) { test_title(Handle , "testgroup1", "testcase1", "", ""); test_step(Handle, "1", "Starting to power up, powering up successfully, powering up successfully");; test_pass((Handle, "1", "Starting to power up"). }

5.test_fail

function name	s32 test_fail(const native_int Handle, const char* teststep, const char* Description)
Function	Marking a step in a test case as a failure
call location	The test_title function for each test case is followed by the
Input parameter	Handle :Handle to the test report teststep: test step Description:Step Description
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; s32 ret = Test_init(&Handle , "testReport"); if(ret == 0) { test_title(Handle , "testgroup1", "testcase1", "", ""); test_step(Handle, "1", "Starting to power up, powering up successfully, powering up successfully");; test_fail(Handle, "1", "Power-up failure"); }

6.test_final

function name	s32 test_final(const native_int Handle)
Function	End test report generation, release the handle and generate the final HTML test report.
call location	Called after all test cases have been executed.
Input parameter	Handle :Handle of the test report
Return value	==0: function executed successfully Other values: function execution failed
Typical example	native_int Handle = 0; s32 ret = Test_init(&Handle , "testReport"); if(ret == 0) { test_title(Handle , "testgroup1", "testcase1", "", ""); test_step(Handle, "1", "Starting to power up, powering up successfully, powering up successfully");; test_fail(Handle, "1", "Power-up failure"); test_final(Handle). }